Crimpmaster Crimping Station for use w/ Manual Vial Crimpers/Decappers
Stock # 224550

• Enables hand-operated crimpers and decappers to function in a semi-automatic mode
• Accepts most standard hand crimpers and decappers
• Requires inlet air pressure of 25 to 40 psi, which may be obtained from a compressed air cylinder or your standard in-house air supply
• To operate, insert the proper crimper or decapper for the type of seal you wish to use, and depress the foot switch.
• 1 year manufacturer's warranty.

The Crimpmaster® permits setup in 5 easy steps:
1. Attach a piece of 1/4" ID high pressure tubing (not supplied) from the Crimpmaster® foot switch assembly to an adjustable air pressure supply.
2. Connect supplied tubing to Crimpmaster® and foot switch assembly, and place assembly on floor.
3. Remove cushioned grips, adjustable stop screw, and handle retainer from the crimper or decapper (if so equipped).
4. Depress the handles and slide the crimper or decapper into the Crimpmaster®
5.Adjust the air pressure (25-40 psi) for the desired crimping tightness.

The Crimpmaster Crimping Station unit enables hand-operated crimpers and decappers to function in a semi-automatic mode. It accepts most standard hand crimpers and decappers, and requires inlet air pressure of 25 to 40 psi, which may be obtained from a compressed air cylinder or your standard in-house air supply. To operate, simply insert the proper crimper or decapper for the type of seal you wish to use, and depress the foot switch. 1 year warranty.