Free UPS Ground Shipping
Fast Order Form
Enter Stock #


Lab Equipment, BeadBug™ 6 Microtube Homogenizer Next Page


Lab Equipment, BeadBug™ 6 Microtube Homogenizer    Lab Equipment, BeadBug™ 6 Microtube Homogenizer

The BeadBug™ 6 Microtube Homogenizers provide fast and efficient homogenization of up to 6 2.0 ml samples simultaneously, or 2 5.0 ml tubes (with an added adapter, sold separately). Sample disruption occurs with a three-dimensional shaking motion that allows for homogenization of samples within approximately 45 seconds, allowing for proper use in fast pace laboratory settings. When programming the BeadBug™ 6, choose the speed, time and number of cycles and optional pause between cycles from the easy to use menu. For even faster use, the last programmed parameters will be saved, along with 50 other options for repeated runs. The sample tubes available to fit the BeadBug™ 6 are prefilled with screw caps to reduce cross-contamination during cycles. The BeadBug™ 6 is compatible with a selection of sample tubes filled with glass, zirconium or stainless steel beads in a range of sizes to fit a variety of sample testing needs available for purchase from the Add-Ons menu. The BeadBug™ 6 Microtube Homogenizer can efficiently handle cell cultures, organ tissues and more within your laboratory. Lab Equipment, BeadBug™ 6 Microtube Homogenizer


Stock #+ Size Description Cs Case Pk PrcPrice/Cs Qty Addons
  D1036 115V  Beadbug™ 6 Microtube Homogenizer  1/cs $2,316.62
  D1036-E 230V  Beadbug™ 6 Microtube Homogenizer  1/cs $2,225.05
  D1036-A5   Beadbug™ 6 Adapters for 5 ml Tubes  2/cs $78.82



Not Available

These items are currently unavailable:



Select out of stock items above and enter your email address. As soon as each of these items becomes available at SKS, you will receive an automatic notification sent to this email address.


Product Info



*Note: 5.0 ml tubes require 5.0 ml adapters, sold separately (D1036-A5)

Stock # Size Lgt Wd Hgt Case Pk Capacity
D1036 115V 355 mm 218 mm 203 mm 1/cs 6 x 2.0 ml or 2 x 5.0 ml*
D1036-E 115V 355 mm 218 mm 203 mm 1/cs 6 x 2.0 ml or 2 x 5.0 ml*
Features:
  • Speed Range: 4.0 to 7.0 m/s (.05 m/s increments)
  • Capacity: 6 x 2.0 ml or 2 x 5.0 ml tubes with additional adapter sold separately
  • Noise Level: <65 db
  • Cycle Time: 1 - 90 sec
  • Pause Between Cycles: 0 - 90 sec (1 sec increments)
  • Max Cycles Per Program: 10
  • Memory holds up to 50 cycle programs
  • Dimensions: 8.6 x 14 x 8 in
  • Weight: 20 lb
  • Power: 100 to 240V, 50 - 60Hz

Other Options

Laboratory Supply, BeadBug™ & BeadBlaster™ Tubes For Homogenizers
Laboratory Supply, BeadBug™ & BeadBlaster™ Tubes For Homogenizers
BeadBug Microtube Homogenizer
BeadBug Microtube Homogenizer





The BeadBug™ 6 Microtube Homogenizers provide fast and efficient homogenization of up to 6 2.0 ml samples simultaneously, or 2 5.0 ml tubes (with an added adapter, sold separately). Sample disruption occurs with a three-dimensional shaking motion that allows for homogenization of samples within approximately 45 seconds, allowing for proper use in fast pace laboratory settings. When programming the BeadBug™ 6, choose the speed, time and number of cycles and optional pause between cycles from the easy to use menu. For even faster use, the last programmed parameters will be saved, along with 50 other options for repeated runs. The sample tubes available to fit the BeadBug™ 6 are prefilled with screw caps to reduce cross-contamination during cycles. The BeadBug™ 6 is compatible with a selection of sample tubes filled with glass, zirconium or stainless steel beads in a range of sizes to fit a variety of sample testing needs available for purchase from the Add-Ons menu. The BeadBug™ 6 Microtube Homogenizer can efficiently handle cell cultures, organ tissues and more within your laboratory.




Free Shipping