Filling Machine, Omnispense Automatic Dispenser

Omnispense Plus Automatic Dispenser:

• 1 unit
• Foot pedal (#I050694)
• Hand dispenser
• 3 mm I.D. silicone tubing: 5 feet (#374311)
• 6 mm I.D. silicone tubing: 5 feet (#374313)

• Replacement Nozzles
• Replacement Tubing
• Footswitch
• Replacement Sinkers

• Pumphead: 2.3 mm supplied with unit
• Compatible tubing sizes: 2, 3, 4.5, 6 and 8 mm I.D.
• Approximate Max. Dispensing Ranges/Flow Rate Ranges (±3%) for Various Tubing Sizes:
  

  I.D.	Max. Dispensing Amt.	Flow Rate Range
  2 mm	2,400,000 ml	.34 ml/sec - 2.9 ml/sec
  3 mm	3,300,000 ml	.67 ml/sec - 5.9 ml/sec
  6 mm	10,500,000 ml	2.19 ml/sec - 19.6 ml/sec
  8 mm	17,000,000	3.34 ml/sec - 29.1 ml/sec

  
  
• Comes with extended life (2.3 mm (0.09") heavy wall) tubing, 3 mm I.D. and 6 mm I.D. silicone tubing
• Full microprocessor controls
• One-step volume calibration
• Accuracy: as high as 1% midrange
• Large, bright multi-language self-prompting LCD display: prompts can easily be changed from English to French, German, Italian, Portuguese or Spanish
• User selective functions: volume, tubing size, automatic delay interval, ramp time, pump direction, pump speed, pump function, dose count, calibration, automatic/manual operation, memory functions, audible alert cycle
• Adjustable ramp feature: allows pump to come up to speed gradually, helps prevent foaming and splashing when dispensing into dishes or small vials
• Stores up to 100 set-ups for quick recall
• Expanded tubing sizes - new pumpheads support many additional tubing sizes
• Comes with both foot and hand-held dispensers
• Built-in constant flow-rate dispenser: fully programmable delivery of preset volume over a specific period of time with a display of the cumulative volume delivered
• Hand-held tubing holder with a start/stop switch - excellent for remote filling or for use under a hood
• Built-in tubing support - conveniently holds tubing for filling containers
• Supports up to 3 pumpheads, for easy multiple dosing
• Dispense pull back feature: automatically dispenses the volume set then reverses to relieve pressure in the tubing, thus helping to eliminate drips
• External connection for remote start/stop, also supplies pump running/stopped feedback, sends End of Dispense (EOD) signal to controller
• Operating Speed: 41 to 417 RPM
• Electrical requirements: 100-120 VAC, 50/60 Hz, 70 watts
• Power Consumption: 37 watts
• Fuse: 1.25 AT 3AG 250V
• Operating Temperature: 15°C to 40°C
• Operating Humidity: 80% up to 31°C; 50% at 40°C
• Altitude Limit: 2000 meters
• Conformance with UL, CSA and CE standards

If you're not completely satisfied you may return within 30 days - SEE RETURN POLICY

The Omnispense Plus features full microprocessor control of a wide range of dispensing parameters. A full featured membrane keypad allows direct user entry of volume, tubing size, automatic delay interval, ramp time, pump direction and speed, dose count and more. The large, bright, self prompting LCD screen and one-step volume calibration ensures quick setup and ease of operation. The pump is self-priming, and is compatible with a wide variety of tubing sizes and materials.

An adjustable ramp feature allows the pump to come up to speed gradually and helps prevent foaming and splashing when dispensing into dishes or small vials. For added versatility, the user can select between automatic and manual modes. When operated in automatic mode, an adjustable delay can be set from 0.5 to 25.5 seconds between doses to accommodate user dexterity and work load. When operated in the manual mode, the dispenser can be activated by depressing either the front panel mounted key start, the hand set mounted key, or the optional footswitch, which is included in the Omnispense Plus package.

Unlike conventional peristaltic pumps which rely on a "trail and error" method of volume calibration, the Omnispense Plus allows direct user entry of volume in ml. Up to 100 pre-selected set-ups can be stored in memory and quickly retrieved for later use. Selections stored in memory are preserved even after powering the unit down. Pump speed is variable from 41 to 417 RPM, which facilitates usage where flow rate control is critical. A flexible tubing support stand is included to facilitate hands free operation.

The Omnispense Plus can be used in both laboratory and industrial settings for various dispensing and aspirating operations. The pump is perfectly suited for accurately dispensing liquids ranging in viscosity from aqueous solutions to medium syrups. The liquids being dispensed remain contained within the tubing to avoid contamination. The pump can be triggered to run remotely either by the optional footswitch (included), or by an industrial Programmable Logic Controller (PLC) using either a dry contact relay or isolated open collector transistor output. The Omnispense Plus is capable of sending End of Dispense (EOD) feedback signal to a controller for remote automated operation.


*Factory Ship Item, allow 5-7 days for shipment