Adenna Gold Latex Powder Free Examination Gloves are the ultimate choice of dental and medical professionals who demand uncompromising quality and protection, with the minimum risk of potential glove related chemical or protein allergies. Specially manufactured with light chlorination rinse, these gloves maintain a non-slip, 'tacky' surface that provides excellent grip for both dry and wet applications. Powder free gloves minimize the risk of latex protein or chemical residue related allergies, as well as eliminating powder related contamination in critical exam procedures. Sold in single boxes of 100 gloves, or in cases containing 10 boxes (1000 gloves total).
Features:
- Smooth interior finish for easy donning and comfortable wear
- Powder free minimizes the risk of latex protein or chemical residue related allergies
- Full textured surface provides superior grip in wet or dry applications
- Eliminate powder related contamination in critical exam procedures
- Primary material is natural rubber latex in natural white color
- Ambidextrous with beaded cuff
- Non-sterile, for single use only (disposable)
- Meets ASTM D3578-99 requirements
- Palm Width:
XS: 80 mm ±2
S: 85 mm ±2
M: 95 mm ±2
L: 105 mm ±2
XL: 110 mm ±2
- Finger thickness: .19 mm or 7.5 mil (minimum)
- Palm thickness: .17 mm or 6.7 mil (minimum)
- Length: 240 mm or 9.5" from top of middle finger to edge of cuff (minimum)
- Tensile Strength: Before aging: 21 Mpa (minimum); After aging: 18 Mpa (minimum)
- Ultimate Elongation: Before aging: 750% (minimum); After aging: 720% (minimum)
- Protein Levels: Contains 50 micrograms or less of total water extractable protein per square decimeter of glove surface area. Total protein content is determined by using Modified Lowry Test Method, ASTM D5712-99.
- Packaging: Bar-coded packaging. 100 gloves (by weight) per box, 10 boxes per case.
Physical Data - Composition:
| Natural Rubber Latex |
95.0 - 98.0% |
| Ammonium Laurate |
0.01 - 0.20 % |
| Lowinox CPL |
0.60 - 1.00% |
| Teric 320 |
0.10 - 0.20% |
| Zinc Oxide |
0.35 - 0.60% |
| ZDEC (Zinc diethyldithiocarbamate) |
0.20 - 0.80% |
| ZDMC (Zinc dimethyldithiocarbamate) |
0.10 - 0.50% |
| ZDBC (Zinc dibutyldithiocarbamate) |
0.10 - 0.60% |
| Sulphur |
0.60 - 1.30% |
| Titanium Dioxide |
0.50 - 0.80% |
| Potassium Hydroxide |
0.50 - 0.80% |
*Note: Small amount of a mold release lubricant is used to facilitate stripping from the formers. Most of the calcium carbonate is removed from the gloves during the chlorination washing process. (Product: Schaefer Precarb; Chemical Name: Precipitated Calcium Carbonate CAS#471-34-1; Manufacturer: Schaefer Honiak.
Fire and Explosion
Stability: Stable Material will not support combustion.
Extinguishing Media: Foam, Carbon Dioxide, Dry Powder, Water Spray
Precaution
This product contains natural rubber latex which may cause allergic reactions. Other components used in making gloves may also cause allergic reactions in some individuals. If user or a patient are allergic to latex or experience any discomfort, discontinue use immediately and consult with a physician. Latex-free vinyl and nitrile exam gloves are also available.
Do not reuse gloves. Good quality exam gloves provide an excellent biological barrier. They are not intended for use as a chemical barrier.
Storage
Store in original packing in a cool, dry and well ventilated area, away from dust, sunlight, moisture, X-ray, and excessive heat above 100°F (37°C).
For more information on Latex Exam Gloves...
Gloves:
New Products
