Adenna EXPLORER is a 8 mil thick, 9½ inch long, powder free latex exam glove designed to provide extra protection and stronger resistance to wear and tear on the job. The thickness of the glove fingers is almost double of regular exam gloves. It provides the peace of mind and confidence to professionals in the lab, veterinary, safety, mechanical and manufacturing fields. Adenna EXPLORER is the glove of choice for those who perform in critical environments. The Explorer latex gloves also feature a fully textured surface which provides superior grip in both wet and dry applications. Available in five sizes and sold in single boxes of 100 gloves, or in cases containing 10 boxes (1000 gloves total).
Features:
- 8 mil thickness for extra protection and stronger resistance to wear and tear
- Powder free minimizes the risk of latex protein and chemical residue related allergies
- Full textured surface provides superior grip in wet and dry applications
- Lowest allowable protein claims of less than 50 ug/dm2 meets FDA and ADA standards
- Combined on-line chlorination and polymer-coated technology results in easy donning and product consistency
- Primary material is natural rubber latex in natural white color
- Ambidextrous with beaded cuff
- Non-sterile, for single use only (disposable)
- Meet ASTM D3578-99 requirements
- Palm Width:
S: 85 mm ±2
M: 95 mm ±2
L: 105 mm ±2
- Finger thickness: .19 mm or 7.5 mil (minimum)
- Palm thickness: .17 mm or 6.7 mil (minimum)
- Length: 240 mm or 9.5" from top of middle finger to edge of cuff (minimum)
- Tensile Strength: Before aging: 21 Mpa (minimum); After aging: 18 Mpa (minimum)
- Ultimate Elongation: Before aging: 750% (minimum); After aging: 720% (minimum)
- Protein Levels: Contains 50 micrograms or less of total water extractable protein per square decimeter of glove surface area. Total protein content is determined by using Modified Lowry Test Method, ASTM D5712-99.
- Packaging: Bar-coded packaging. 100 gloves (by weight) per box, 10 boxes per case.
Physical Data - Composition:
| Natural Rubber Latex |
95.0 - 98.0% |
| Ammonium Laurate |
0.01 - 0.20 % |
| Lowinox CPL |
0.60 - 1.00% |
| Teric 320 |
0.10 - 0.20% |
| Zinc Oxide |
0.35 - 0.60% |
| ZDEC (Zinc diethyldithiocarbamate) |
0.20 - 0.80% |
| ZDMC (Zinc dimethyldithiocarbamate) |
0.10 - 0.50% |
| ZDBC (Zinc dibutyldithiocarbamate) |
0.10 - 0.60% |
| Sulphur |
0.60 - 1.30% |
| Titanium Dioxide |
0.50 - 0.80% |
| Potassium Hydroxide |
0.50 - 0.80% |
* Note: Small amount of a mold release lubricant is used to facilitate stripping from the formers. Most of the calcium carbonate is removed from the gloves during the chlorination washing process. (Product: Schaefer Precarb; Chemical Name: Precipitated Calcium Carbonate CAS#471-34-1; Manufacturer: Schaefer Honiak.
Fire and Explosion
Stability: Stable. Material will not support combustion.
Flash Point: N/A
Extinguishing Media: Foam, Carbon Dioxide, Dry Powder, Water Spray
Precaution
This product contains natural rubber latex which may cause allergic reactions. Other components used in making gloves may also cause allergic reactions in some individuals. If user or a patient are allergic to latex or experience any discomfort, discontinue use immediately and consult with a physician. Latex-free vinyl and nitrile exam gloves are also available.
Do not reuse gloves. Good quality exam gloves provide an excellent biological barrier. They are not intended for use as a chemical barrier.
Storage
Store in original packing in a cool, dry and well ventilated area, away from dust, sunlight, moisture, X-ray, and excessive heat above 100°F (37°C).
For more information on Latex Exam Gloves...
Gloves:
