Fast Order Form
Enter Stock #


Laboratory Equipment, Hand Held Homogenizers Next Page


Laboratory Equipment, Hand Held Homogenizers Laboratory Equipment, Hand Held Homogenizers

The D1000 hand held homogenizer, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1 ml to 250 ml (depending upon the generator probe used).

The D1000 is a rotor stator homogenizer, and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds or less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting.

Generator probes are available in four sizes. The 5 mm and 7 mm diameter have a 50 mm length for use with samples in microbtubes. The 10 mm x 115 mm is ideal for use with 15 and 50 ml tubes and 14 mm x 130 mm, for 50 ml tubes and vessels up to 250 ml. The unit is supplied with one each of the 5 mm and 7 mm generator probes. All the generator probes are made of stainless steel and can be sterilized by autoclaving.


Stock #+ Size Description Cs Case Pk PrcPrice/Cs Qty
  D1000 115V  Hand Held Homogenizer w/ 5 mm & 7 mm Probes  1/cs $913.75
  D1000-E 230V  Hand Held Homogenizer w/ 5 mm & 7 mm Probes (European Plug)  1/cs $913.75
  D1000-M5 5 mm x 50 mm  Replacement Generators, Flat Bottom  1/cs $453.05
  D1000-M7 7 mm x 50 mm  Replacement Generators, Saw Tooth  1/cs $480.68
  D1000-M10 10 mm x 115 mm  Optional Generator, Saw Tooth  1/cs $269.88
  D1000-M14 14 mm x 130 mm  Optional Generator, Saw Tooth  1/cs $806.65
  D1000-ST Optional Mounting/Storage Stand  1/cs $361.25



Not Available

These items are currently unavailable:



Select out of stock items above and enter your email address. As soon as each of these items becomes available at SKS, you will receive an automatic notification sent to this email address.


Product Info


Replacement Generators, Flat Bottom Optional generator, Saw Tooth
Stock# Description
Case Pk
D1000 115V Hand Held Homogenizer 229 mm 114 mm 150 mm 1/cs
D1000-E 230V Hand Held Homogenizer (European Plug) 229 mm 114 mm 150 mm 1/cs
D1000-M5 * - 50 mm 5 mm 1/cs
D1000-M7 * Replacement Generators, Saw Tooth - 50 mm 7 mm 1/cs
D1000-M10 - 115 mm 10 mm 1/cs
D1000-M14 Optional generator, Saw Tooth - 130 mm 14 mm 1/cs
D1000-ST Optional Mounting/Storage Stand - - - 1/cs

* Included with D1000 and D1000-E Homogenizers

Features:
  • Homogenizers include 7 mm saw tooth and 5 mm flat bottom generator probes (one each)
  • Probes are Autoclavable
  • Speed is adjustable in 6 steps
  • Most samples can be quickly homogenized in 30 seconds or less
  • Speed Range: 8500 - 30,000 rpm
  • Capacity: 0.1 - 250 ml
  • Operating Temp. Range: +4° - 65° C
  • Noise level: < 70 db
  • Electrical: 115V, 60 Hz (D1000) or 230V, 50 Hz (D1000-E)
  • 2 year manufacturer's warranty

Hand Held Homogenizers with Stand
Shown with Optional Stand
(D1000-ST)
Probes for Hand Held Homogenizers
Available Generator Heads


Other Options

BeadBug Microtube Homogenizer
BeadBug Microtube Homogenizer
StripSpin 12 Mini Centrifuge
StripSpin 12 Mini Centrifuge
Benchmark Mini Centrifuges
Benchmark Mini Centrifuges
BioClave Digital Bench Top Autoclave
BioClave Digital Bench Top Autoclave
Sterile Closed System Tissue Grinders
Sterile Closed System Tissue Grinders
MyFuge Mini Centrifuges
MyFuge Mini Centrifuges





The D1000 hand held homogenizer, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1 ml to 250 ml (depending upon the generator probe used).

The D1000 is a rotor stator homogenizer, and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds or less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting.

Generator probes are available in four sizes. The 5 mm and 7 mm diameter have a 50 mm length for use with samples in microbtubes. The 10 mm x 115 mm is ideal for use with 15 and 50 ml tubes and 14 mm x 130 mm, for 50 ml tubes and vessels up to 250 ml. The unit is supplied with one each of the 5 mm and 7 mm generator probes. All the generator probes are made of stainless steel and can be sterilized by autoclaving.




Free Shipping